Filtered by vendor Arm
Subscribe
Total
123 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-28388 | 4 Arm, Mips, Powerpc Project and 1 more | 8 Arm, Mips, Powerpc and 5 more | 2023-12-10 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability has been identified in APOGEE PXC Compact (BACnet) (All versions < V3.5.5), APOGEE PXC Compact (P2 Ethernet) (All versions < V2.8.20), APOGEE PXC Modular (BACnet) (All versions < V3.5.5), APOGEE PXC Modular (P2 Ethernet) (All versions < V2.8.20), Nucleus NET (All versions < V5.2), Nucleus ReadyStart V3 (All versions < V2012.12), Nucleus Source Code (All versions), PLUSCONTROL 1st Gen (All versions), TALON TC Compact (BACnet) (All versions < V3.5.5), TALON TC Modular (BACnet) (All versions < V3.5.5). Initial Sequence Numbers (ISNs) for TCP connections are derived from an insufficiently random source. As a result, the ISN of current and future TCP connections could be predictable. An attacker could hijack existing sessions or spoof future ones. | |||||
| CVE-2020-16273 | 1 Arm | 2 Armv8-m, Armv8-m Firmware | 2023-12-10 | 7.2 HIGH | 7.8 HIGH |
| In Arm software implementing the Armv8-M processors (all versions), the stack selection mechanism could be influenced by a stack-underflow attack in v8-M TrustZone based processors. An attacker can cause a change to the stack pointer used by the Secure World from a non-secure application if the stack is not initialized. This vulnerability affects only the software that is based on Armv8-M processors with the Security Extension. | |||||
| CVE-2020-24658 | 1 Arm | 1 Arm Compiler | 2023-12-10 | 4.4 MEDIUM | 7.8 HIGH |
| Arm Compiler 5 through 5.06u6 has an error in a stack protection feature designed to help spot stack-based buffer overflows in local arrays. When this feature is enabled, a protected function writes a guard value to the stack prior to (above) any vulnerable arrays in the stack. The guard value is checked for corruption on function return; corruption leads to an error-handler call. In certain circumstances, the reference value that is compared against the guard value is itself also written to the stack (after any vulnerable arrays). The reference value is written to the stack when the function runs out of registers to use for other temporary data. If both the reference value and the guard value are written to the stack, then the stack protection will fail to spot corruption when both values are overwritten with the same value. For both the reference value and the guard value to be corrupted, there would need to be both a buffer overflow and a buffer underflow in the vulnerable arrays (or some other vulnerability that causes two separated stack entries to be corrupted). | |||||
| CVE-2020-16150 | 3 Arm, Debian, Fedoraproject | 3 Mbed Tls, Debian Linux, Fedora | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| A Lucky 13 timing side channel in mbedtls_ssl_decrypt_buf in library/ssl_msg.c in Trusted Firmware Mbed TLS through 2.23.0 allows an attacker to recover secret key information. This affects CBC mode because of a computed time difference based on a padding length. | |||||
| CVE-2020-12883 | 1 Arm | 1 Mbed Os | 2023-12-10 | 6.4 MEDIUM | 9.1 CRITICAL |
| Buffer over-reads were discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses CoAP input linearly using a while loop. Once an option is parsed in a loop, the current point (*packet_data_pptr) is increased correspondingly. The pointer is restricted by the size of the received buffer, as well as by the option delta and option length bytes. The actual input packet length is not verified against the number of bytes read when processing the option extended delta and the option extended length. Moreover, the calculation of the message_left variable, in the case of non-extended option deltas, is incorrect and indicates more data left for processing than provided in the function input. All of these lead to heap-based or stack-based memory location read access that is outside of the intended boundary of the buffer. Depending on the platform-specific memory management mechanisms, it can lead to processing of unintended inputs or system memory access violation errors. | |||||
| CVE-2020-10941 | 3 Arm, Debian, Fedoraproject | 4 Mbed Crypto, Mbed Tls, Debian Linux and 1 more | 2023-12-10 | 4.3 MEDIUM | 5.9 MEDIUM |
| Arm Mbed TLS before 2.16.5 allows attackers to obtain sensitive information (an RSA private key) by measuring cache usage during an import. | |||||
| CVE-2020-13844 | 2 Arm, Opensuse | 15 Cortex-a32, Cortex-a32 Firmware, Cortex-a34 and 12 more | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| Arm Armv8-A core implementations utilizing speculative execution past unconditional changes in control flow may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis, aka "straight-line speculation." | |||||
| CVE-2020-12886 | 1 Arm | 1 Mbed Os | 2023-12-10 | 6.4 MEDIUM | 9.1 CRITICAL |
| A buffer over-read was discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP packet header starting from the message token. The length of the token in the received message is provided in the first byte parsed by the sn_coap_parser_options_parse() function. The length encoded in the message is not validated against the actual input buffer length before accessing the token. As a result, memory access outside of the intended boundary of the buffer may occur. | |||||
| CVE-2020-12887 | 1 Arm | 2 Mbed-coap, Mbed Os | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Memory leaks were discovered in the CoAP library in Arm Mbed OS 5.15.3 when using the Arm mbed-coap library 5.1.5. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP option number field of all options present in the input packet. Each option number is calculated as a sum of the previous option number and a delta of the current option. The delta and the previous option number are expressed as unsigned 16-bit integers. Due to lack of overflow detection, it is possible to craft a packet that wraps the option number around and results in the same option number being processed again in a single packet. Certain options allocate memory by calling a memory allocation function. In the cases of COAP_OPTION_URI_QUERY, COAP_OPTION_URI_PATH, COAP_OPTION_LOCATION_QUERY, and COAP_OPTION_ETAG, there is no check on whether memory has already been allocated, which in conjunction with the option number integer overflow may lead to multiple assignments of allocated memory to a single pointer. This has been demonstrated to lead to memory leak by buffer orphaning. As a result, the memory is never freed. | |||||
| CVE-2020-10932 | 3 Arm, Debian, Fedoraproject | 3 Mbed Tls, Debian Linux, Fedora | 2023-12-10 | 1.9 LOW | 4.7 MEDIUM |
| An issue was discovered in Arm Mbed TLS before 2.16.6 and 2.7.x before 2.7.15. An attacker that can get precise enough side-channel measurements can recover the long-term ECDSA private key by (1) reconstructing the projective coordinate of the result of scalar multiplication by exploiting side channels in the conversion to affine coordinates; (2) using an attack described by Naccache, Smart, and Stern in 2003 to recover a few bits of the ephemeral scalar from those projective coordinates via several measurements; and (3) using a lattice attack to get from there to the long-term ECDSA private key used for the signatures. Typically an attacker would have sufficient access when attacking an SGX enclave and controlling the untrusted OS. | |||||
| CVE-2020-12885 | 1 Arm | 1 Mbed Os | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| An infinite loop was discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse_multiple_options() parses CoAP options in a while loop. This loop's exit condition is computed using the previously allocated heap memory required for storing the result of parsing multiple options. If the input heap memory calculation results in zero bytes, the loop exit condition is never met and the loop is not terminated. As a result, the packet parsing function never exits, leading to resource consumption. | |||||
| CVE-2020-12884 | 1 Arm | 1 Mbed Os | 2023-12-10 | 6.4 MEDIUM | 9.1 CRITICAL |
| A buffer over-read was discovered in the CoAP library in Arm Mbed OS 5.15.3. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse_multiple_options() parses CoAP options that may occur multiple consecutive times in a single packet. While processing the options, packet_data_pptr is accessed after being incremented by option_len without a prior out-of-bounds memory check. The temp_parsed_uri_query_ptr is validated for a correct range, but the range valid for temp_parsed_uri_query_ptr is derived from the amount of allocated heap memory, not the actual input size. Therefore the check of temp_parsed_uri_query_ptr may be insufficient for safe access to the area pointed to by packet_data_pptr. As a result, access to a memory area outside of the intended boundary of the packet buffer is made. | |||||
| CVE-2019-18222 | 3 Arm, Debian, Fedoraproject | 4 Mbed Crypto, Mbed Tls, Debian Linux and 1 more | 2023-12-10 | 1.9 LOW | 4.7 MEDIUM |
| The ECDSA signature implementation in ecdsa.c in Arm Mbed Crypto 2.1 and Mbed TLS through 2.19.1 does not reduce the blinded scalar before computing the inverse, which allows a local attacker to recover the private key via side-channel attacks. | |||||
| CVE-2019-17210 | 1 Arm | 2 Mbed-mqtt, Mbed-os | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| A denial-of-service issue was discovered in the MQTT library in Arm Mbed OS 2017-11-02. The function readMQTTLenString() is called by the function MQTTDeserialize_publish() to get the length and content of the MQTT topic name. In the function readMQTTLenString(), mqttstring->lenstring.len is a part of user input, which can be manipulated. An attacker can simply change it to a larger value to invalidate the if statement so that the statements inside the if statement are skipped, letting the value of mqttstring->lenstring.data default to zero. Later, curn is accessed, which points to mqttstring->lenstring.data. On an Arm Cortex-M chip, the value at address 0x0 is actually the initialization value for the MSP register. It is highly dependent on the actual firmware. Therefore, the behavior of the program is unpredictable from this time on. | |||||
| CVE-2019-16910 | 3 Arm, Debian, Fedoraproject | 4 Mbed Crypto, Mbed Tls, Debian Linux and 1 more | 2023-12-10 | 2.6 LOW | 5.3 MEDIUM |
| Arm Mbed TLS before 2.19.0 and Arm Mbed Crypto before 2.0.0, when deterministic ECDSA is enabled, use an RNG with insufficient entropy for blinding, which might allow an attacker to recover a private key via side-channel attacks if a victim signs the same message many times. (For Mbed TLS, the fix is also available in versions 2.7.12 and 2.16.3.) | |||||
| CVE-2018-5402 | 2 Arm, Auto-maskin | 6 Arm7, Dcu 210e, Dcu 210e Firmware and 3 more | 2023-12-10 | 6.5 MEDIUM | 8.8 HIGH |
| The Auto-Maskin DCU 210E, RP-210E, and Marine Pro Observer Android App use an embedded webserver that uses unencrypted plaintext for the transmission of the administrator PIN Impact: An attacker once authenticated can change configurations, upload new configuration files, and upload executable code via file upload for firmware updates. Requires access to the network. Affected releases are Auto-Maskin DCU-210E, RP-210E, and the Marine Pro Observer Android App. Versions prior to 3.7 on ARMv7. | |||||
| CVE-2018-5401 | 2 Arm, Auto-maskin | 6 Arm7, Dcu 210e, Dcu 210e Firmware and 3 more | 2023-12-10 | 4.3 MEDIUM | 5.9 MEDIUM |
| The Auto-Maskin DCU 210E, RP-210E, and Marine Pro Observer Android App transmit sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors. The devices transmit process control information via unencrypted Modbus communications. Impact: An attacker can exploit this vulnerability to observe information about configurations, settings, what sensors are present and in use, and other information to aid in crafting spoofed messages. Requires access to the network. Affected releases are Auto-Maskin DCU-210E, RP-210E, and Marine Pro Observer Android App. Versions prior to 3.7 on ARMv7. | |||||
| CVE-2018-0497 | 2 Arm, Debian | 2 Mbed Tls, Debian Linux | 2023-12-10 | 4.3 MEDIUM | 5.9 MEDIUM |
| ARM mbed TLS before 2.12.0, before 2.7.5, and before 2.1.14 allows remote attackers to achieve partial plaintext recovery (for a CBC based ciphersuite) via a timing-based side-channel attack. This vulnerability exists because of an incorrect fix (with a wrong SHA-384 calculation) for CVE-2013-0169. | |||||
| CVE-2018-19608 | 1 Arm | 1 Mbed Tls | 2023-12-10 | 1.9 LOW | 4.7 MEDIUM |
| Arm Mbed TLS before 2.14.1, before 2.7.8, and before 2.1.17 allows a local unprivileged attacker to recover the plaintext of RSA decryption, which is used in RSA-without-(EC)DH(E) cipher suites. | |||||
| CVE-2018-5400 | 2 Arm, Auto-maskin | 5 Arm7, Dcu 210e, Dcu 210e Firmware and 2 more | 2023-12-10 | 6.4 MEDIUM | 9.1 CRITICAL |
| The Auto-Maskin products utilize an undocumented custom protocol to set up Modbus communications with other devices without validating those devices. The originating device sends a message in plaintext, 48:65:6c:6c:6f:20:57:6f:72:6c:64, "Hello World" over UDP ports 44444-44446 to the broadcast address for the LAN. Without verification devices respond to any of these broadcast messages on the LAN with a plaintext reply over UDP containing the device model and firmware version. Following this exchange the devices allow Modbus transmissions between the two devices on the standard Modbus port 502 TCP. Impact: An attacker can exploit this vulnerability to send arbitrary messages to any DCU or RP device through spoofing or replay attacks as long as they have access to the network. Affected releases are Auto-Maskin DCU-210E RP-210E: Versions prior to 3.7 on ARMv7. | |||||