Total
83 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-19417 | 1 Huawei | 100 Ar120-s, Ar120-s Firmware, Ar1200 and 97 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| The SIP module of some Huawei products have a denial of service (DoS) vulnerability. A remote attacker could exploit these three vulnerabilities by sending the specially crafted messages to the affected device. Due to the insufficient verification of the packets, successful exploit could allow the attacker to cause buffer overflow and dead loop, leading to DoS condition. Affected products can be found in https://www.huawei.com/en/psirt/security-advisories/huawei-sa-20200115-01-sip-en. | |||||
| CVE-2020-1814 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 3.5 LOW | 5.3 MEDIUM |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Dangling pointer dereference vulnerability. An authenticated attacker may do some special operations in the affected products in some special scenarios to exploit the vulnerability. Due to improper race conditions of different operations, successful exploit will lead to Dangling pointer dereference, causing some service abnormal. | |||||
| CVE-2019-5274 | 1 Huawei | 2 Usg9500, Usg9500 Firmware | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in an infinite loop, an attacker may exploit the vulnerability via a malicious certificate to perform a denial of service attack on the affected products. | |||||
| CVE-2019-19411 | 1 Huawei | 2 Usg9500, Usg9500 Firmware | 2023-12-10 | 4.3 MEDIUM | 3.7 LOW |
| USG9500 with versions of V500R001C30SPC100, V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, V500R005C00SPC100, V500R005C00SPC200 have an information leakage vulnerability. Due to improper processing of the initialization vector used in a specific encryption algorithm, an attacker who gains access to this cryptographic primitive may exploit this vulnerability to cause the value of the confidentiality associated with its use to be diminished. | |||||
| CVE-2020-1856 | 1 Huawei | 12 Ngfw Module, Ngfw Module Firmware, Nip6300 and 9 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Huawei NGFW Module, NIP6300, NIP6600, Secospace USG6500, Secospace USG6600, and USG9500 versions V500R001C30, V500R001C60, and V500R005C00 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage. | |||||
| CVE-2020-1857 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. Due to improper processing of some data, a local authenticated attacker can exploit this vulnerability through a series of operations. Successful exploitation may cause information leakage. | |||||
| CVE-2020-1877 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 4.9 MEDIUM | 4.4 MEDIUM |
| NIP6800;Secospace USG6600;USG9500 with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have an invalid pointer access vulnerability. The software system access an invalid pointer when administrator log in to the device and performs some operations. Successful exploit could cause certain process reboot. | |||||
| CVE-2020-1829 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30 and V500R001C60SPC500; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, and V500R001C60SPC500 have a vulnerability that the IPSec module handles a message improperly. Attackers can send specific message to cause double free memory. This may compromise normal service. | |||||
| CVE-2020-1881 | 1 Huawei | 8 Nip6800, Nip6800 Firmware, Oceanstor 5310 and 5 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| NIP6800;Secospace USG6600;USG9500 products with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have have a resource management error vulnerability. An attacker needs to perform specific operations to trigger a function of the affected device. Due to improper resource management of the function, the vulnerability can be exploited to cause service abnormal on affected devices. | |||||
| CVE-2020-1873 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| NIP6800;Secospace USG6600;USG9500 products with versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have an out-of-bounds read vulnerability. An unauthenticated attacker crafts malformed message with specific parameter and sends the message to the affected products. Due to insufficient validation of message, which may be exploited to cause the device reboot. | |||||
| CVE-2019-5272 | 1 Huawei | 2 Usg9500, Usg9500 Firmware | 2023-12-10 | 4.0 MEDIUM | 4.9 MEDIUM |
| USG9500 with versions of V500R001C30;V500R001C60 have a missing integrity checking vulnerability. The software of the affected products does not check the integrity which may allow an attacker with high privilege to make malicious modifications without detection. | |||||
| CVE-2020-1874 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 4.9 MEDIUM | 5.5 MEDIUM |
| NIP6800;Secospace USG6600;USG9500 products versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have a invalid pointer access vulnerability. The software system access an invalid pointer when operator logs in to the device and performs some operations. Successful exploit could cause certain process reboot. | |||||
| CVE-2020-1815 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 4.3 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a memory leak vulnerability. The software does not sufficiently track and release allocated memory while parse certain message, the attacker sends the message continuously that could consume remaining memory. Successful exploit could cause memory exhaust. | |||||
| CVE-2020-1830 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 5.0 MEDIUM | 5.3 MEDIUM |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a vulnerability that a memory management error exists when IPSec Module handing a specific message. This causes 1 byte out-of-bound read, compromising normal service. | |||||
| CVE-2019-5273 | 1 Huawei | 2 Usg9500, Usg9500 Firmware | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in a large heap buffer overrun error, an attacker may exploit the vulnerability by a malicious certificate, resulting a denial of service on the affected products. | |||||
| CVE-2020-1875 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| NIP6800;Secospace USG6600;USG9500 products versions of V500R001C30; V500R001C60SPC500; V500R005C00SPC100 have an invalid pointer access vulnerability. The software system access an invalid pointer when an abnormal condition occurs in certain operation. Successful exploit could cause certain process reboot. Affected product versions include:NIP6800 versions V500R001C30,V500R001C60SPC500;Secospace USG6600 versions V500R001C30SPC200,V500R001C30SPC600,V500R001C60SPC500;USG9500 versions V500R001C30SPC200,V500R001C30SPC600,V500R001C60SPC500. | |||||
| CVE-2020-1871 | 1 Huawei | 2 Usg9500, Usg9500 Firmware | 2023-12-10 | 6.4 MEDIUM | 8.2 HIGH |
| USG9500 with software of V500R001C30SPC100; V500R001C30SPC200; V500R001C30SPC600; V500R001C60SPC500; V500R005C00SPC100; V500R005C00SPC200 have an improper credentials management vulnerability. The software does not properly manage certain credentials. Successful exploit could cause information disclosure or damage, and impact the confidentiality or integrity. | |||||
| CVE-2020-1816 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 4.3 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Denial of Service (DoS) vulnerability. Due to improper processing of specific IPSEC packets, remote attackers can send constructed IPSEC packets to affected devices to exploit this vulnerability. Successful exploit could cause the IPSec function of the affected device abnormal. | |||||
| CVE-2020-1858 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Huawei products NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; Secospace USG6600 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100; and USG9500 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have a denial of service vulnerability. Attackers need to perform a series of operations in a special scenario to exploit this vulnerability. Successful exploit may cause the new connections can't be established, result in a denial of service. | |||||
| CVE-2020-1827 | 1 Huawei | 6 Nip6800, Nip6800 Firmware, Secospace Usg6600 and 3 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage. | |||||