Filtered by vendor Linksys
Subscribe
Total
97 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-1406 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-04-11 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability was found in Linksys WRT54GL 4.30.18. It has been declared as problematic. This vulnerability affects unknown code of the file /SysInfo1.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. VDB-253330 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-1405 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-04-11 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability was found in Linksys WRT54GL 4.30.18. It has been classified as problematic. This affects an unknown part of the file /wlaninfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier VDB-253329 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2024-1404 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2024-04-11 | 3.3 LOW | 7.5 HIGH |
| A vulnerability was found in Linksys WRT54GL 4.30.18 and classified as problematic. Affected by this issue is some unknown functionality of the file /SysInfo.htm of the component Web Management Interface. The manipulation leads to information disclosure. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-253328. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2006-2559 | 1 Linksys | 2 Wrt54g, Wrt54g V5 | 2024-02-14 | 7.5 HIGH | N/A |
| Linksys WRT54G Wireless-G Broadband Router allows remote attackers to bypass access restrictions and conduct unauthorized operations via a UPnP request with a modified InternalClient parameter, which is not validated, as demonstrated by using AddPortMapping to forward arbitrary traffic. | |||||
| CVE-2010-1573 | 1 Linksys | 2 Wap54g, Wap54g Firmware | 2024-02-13 | 10.0 HIGH | 9.8 CRITICAL |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2022-38841 | 1 Linksys | 2 E8450, E8450 Firmware | 2023-12-10 | N/A | 8.8 HIGH |
| Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page. | |||||
| CVE-2023-31742 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges. | |||||
| CVE-2023-31741 | 1 Linksys | 2 E2000, E2000 Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges. | |||||
| CVE-2023-31740 | 1 Linksys | 2 E2000, E2000 Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges. | |||||
| CVE-2022-43971 | 1 Linksys | 2 Wumc710, Wumc710 Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| An arbitrary code exection vulnerability exists in Linksys WUMC710 Wireless-AC Universal Media Connector with firmware <= 1.0.02 (build3). The do_setNTP function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious GET or POST request to /setNTP.cgi to execute arbitrary commands on the underlying Linux operating system as root. | |||||
| CVE-2022-43970 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| A buffer overflow vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A stack-based buffer overflow in the Start_EPI function within the httpd binary allows an authenticated attacker with administrator privileges to execute arbitrary commands on the underlying Linux operating system as root. This vulnerablity can be triggered over the network via a malicious POST request to /apply.cgi. | |||||
| CVE-2022-43973 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-12-10 | N/A | 7.2 HIGH |
| An arbitrary code execution vulnerability exisits in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. The Check_TSSI function within the httpd binary uses unvalidated user input in the construction of a system command. An authenticated attacker with administrator privileges can leverage this vulnerability over the network via a malicious POST request to /apply.cgi to execute arbitrary commands on the underlying Linux operating system as root. | |||||
| CVE-2022-43972 | 1 Linksys | 2 Wrt54gl, Wrt54gl Firmware | 2023-12-10 | N/A | 7.5 HIGH |
| A null pointer dereference vulnerability exists in Linksys WRT54GL Wireless-G Broadband Router with firmware <= 4.30.18.006. A null pointer dereference in the soap_action function within the upnp binary can be triggered by an unauthenticated attacker via a malicious POST request invoking the AddPortMapping action. | |||||
| CVE-2022-35572 | 1 Linksys | 2 E5350, E5350 Firmware | 2023-12-10 | N/A | 7.5 HIGH |
| On Linksys E5350 WiFi Router with firmware version 1.0.00.037 and lower, (and potentially other vendors/devices due to code reuse), the /SysInfo.htm URI does not require a session ID. This web page calls a show_sysinfo function which retrieves WPA passwords, SSIDs, MAC Addresses, serial numbers, WPS Pins, and hardware/firmware versions, and prints this information into the web page. This web page is visible when remote management is enabled. A user who has access to the web interface of the device can extract these secrets. If the device has remote management enabled and is connected directly to the internet, this vulnerability is exploitable over the internet without interaction. | |||||
| CVE-2022-38132 | 1 Linksys | 2 Mr8300, Mr8300 Firmware | 2023-12-10 | N/A | 8.8 HIGH |
| Command injection vulnerability in Linksys MR8300 router while Registration to DDNS Service. By specifying username and password, an attacker connected to the router's web interface can execute arbitrary OS commands. The username and password fields are not sanitized correctly and are used as URL construction arguments, allowing URL redirection to an arbitrary server, downloading an arbitrary script file, and eventually executing the file in the device. This issue affects: Linksys MR8300 Router 1.0. | |||||
| CVE-2022-38555 | 1 Linksys | 2 E1200, E1200 Firmware | 2023-12-10 | N/A | 9.8 CRITICAL |
| Linksys E1200 v1.0.04 is vulnerable to Buffer Overflow via ej_get_web_page_name. | |||||
| CVE-2022-24372 | 1 Linksys | 2 Mr9600, Mr9600 Firmware | 2023-12-10 | 4.9 MEDIUM | 4.6 MEDIUM |
| Linksys MR9600 devices before 2.0.5 allow attackers to read arbitrary files via a symbolic link to the root directory of a NAS SMB share. | |||||
| CVE-2020-35715 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2023-12-10 | 9.0 HIGH | 8.8 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page. | |||||
| CVE-2020-35714 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2023-12-10 | 6.5 MEDIUM | 8.8 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program. | |||||
| CVE-2020-35716 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to cause a persistent denial of service (segmentation fault) via a long /goform/langSwitch langSelectionOnly parameter. | |||||