Total
2146 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-15350 | 1 Riot-os | 1 Riot | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| RIOT 2020.04 has a buffer overflow in the base64 decoder. The decoding function base64_decode() uses an output buffer estimation function to compute the required buffer capacity and validate against the provided buffer size. The base64_estimate_decode_size() function calculates the expected decoded size with an arithmetic round-off error and does not take into account possible padding bytes. Due to this underestimation, it may be possible to craft base64 input that causes a buffer overflow. | |||||
| CVE-2017-18770 | 1 Netgear | 6 Plw1000, Plw1000 Firmware, Plw1010 and 3 more | 2023-12-10 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects R7800 before 1.0.2.36, PLW1000v2 before 1.0.0.14, and PLW1010v2 before 1.0.0.14. | |||||
| CVE-2020-3344 | 1 Cisco | 1 Advanced Malware Protection For Endpoints | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in Cisco AMP for Endpoints Linux Connector Software and Cisco AMP for Endpoints Mac Connector Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted packet to an affected device. A successful exploit could allow the attacker to cause the Cisco AMP for Endpoints service to crash and restart. | |||||
| CVE-2020-16294 | 3 Artifex, Canonical, Debian | 3 Ghostscript, Ubuntu Linux, Debian Linux | 2023-12-10 | 4.3 MEDIUM | 5.5 MEDIUM |
| A buffer overflow vulnerability in epsc_print_page() in devices/gdevepsc.c of Artifex Software GhostScript v9.50 allows a remote attacker to cause a denial of service via a crafted PDF file. This is fixed in v9.51. | |||||
| CVE-2019-14110 | 1 Qualcomm | 104 Apq8009, Apq8009 Firmware, Apq8017 and 101 more | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| Buffer overflow can occur in function wlan firmware while copying association frame content if frame length is more than the maximum buffer size in case of SAP mode in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8064, APQ8096, APQ8096AU, APQ8098, IPQ6018, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA4531, QCA6174A, QCA6564, QCA6574AU, QCA6584, QCA6584AU, QCA8081, QCA9377, QCA9379, QCA9886, QCN7605, QCS404, QCS405, QCS605, Rennell, SA6155P, SC7180, SC8180X, SDA660, SDA845, SDM630, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SM6150, SM7150, SM8150, SXR1130, SXR2130 | |||||
| CVE-2019-20699 | 1 Netgear | 14 Gs105e, Gs105e Firmware, Gs105pe and 11 more | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects GS105Ev2 before 1.6.0.4, GS105PE before 1.6.0.4, GS408EPP before 1.0.0.15, GS808E before 1.7.0.7, GS908E before 1.7.0.3, GSS108E before 1.6.0.4, and GSS108EPP before 1.0.0.15. | |||||
| CVE-2020-15490 | 1 Wavlink | 2 Wl-wn530hg4, Wl-wn530hg4 Firmware | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on Wavlink WL-WN530HG4 M30HG4.V5030.191116 devices. Multiple buffer overflow vulnerabilities exist in CGI scripts, leading to remote code execution with root privileges. (The set of affected scripts is similar to CVE-2020-12266.) | |||||
| CVE-2020-3646 | 1 Qualcomm | 32 Bitra, Bitra Firmware, Msm8909w and 29 more | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| u'Buffer overflow seen as the destination buffer size is lesser than the source buffer size in video application' in Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in Bitra, MSM8909W, QCM2150, QCS405, QCS605, Saipan, SC8180X, SDA845, SDM429W, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR2130 | |||||
| CVE-2017-18693 | 1 Google | 1 Android | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on Samsung mobile devices with KK(4.4), L(5.0/5.1), M(6.0), and N(7.0) software. There is a buffer overflow in the fps sysfs entry. The Samsung ID is SVE-2016-7510 (January 2017). | |||||
| CVE-2018-21050 | 1 Google | 1 Android | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is a Buffer overflow in the esecomm Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12852 (October 2018). | |||||
| CVE-2020-8927 | 6 Canonical, Debian, Fedoraproject and 3 more | 10 Ubuntu Linux, Debian Linux, Fedora and 7 more | 2023-12-10 | 6.4 MEDIUM | 6.5 MEDIUM |
| A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits. | |||||
| CVE-2020-10019 | 1 Zephyrproject | 1 Zephyr | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| USB DFU has a potential buffer overflow where the requested length (wLength) is not checked against the buffer size. This could be used by a malicious USB host to exploit the buffer overflow. See NCC-ZEP-002 This issue affects: zephyrproject-rtos zephyr version 1.14.1 and later versions. version 2.1.0 and later versions. | |||||
| CVE-2019-13165 | 1 Xerox | 2 Phaser 3320, Phaser 3320 Firmware | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the request parser of the IPP service. This would allow an unauthenticated attacker to cause a Denial of Service (DoS) and potentially execute arbitrary code on the device. | |||||
| CVE-2020-10713 | 4 Debian, Gnu, Opensuse and 1 more | 4 Debian Linux, Grub2, Leap and 1 more | 2023-12-10 | 4.6 MEDIUM | 8.2 HIGH |
| A flaw was found in grub2, prior to version 2.06. An attacker may use the GRUB 2 flaw to hijack and tamper the GRUB verification process. This flaw also allows the bypass of Secure Boot protections. In order to load an untrusted or modified kernel, an attacker would first need to establish access to the system such as gaining physical access, obtain the ability to alter a pxe-boot network, or have remote access to a networked system with root access. With this access, an attacker could then craft a string to cause a buffer overflow by injecting a malicious payload that leads to arbitrary code execution within GRUB. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. | |||||
| CVE-2020-9067 | 1 Huawei | 6 Smartax Ea5800, Smartax Ea5800 Firmware, Smartax Ma5600t and 3 more | 2023-12-10 | 5.2 MEDIUM | 8.0 HIGH |
| There is a buffer overflow vulnerability in some Huawei products. The vulnerability can be exploited by an attacker to perform remote code execution on the affected products when the affected product functions as an optical line terminal (OLT). Affected product versions include:SmartAX MA5600T versions V800R013C10, V800R015C00, V800R015C10, V800R017C00, V800R017C10, V800R018C00, V800R018C10; SmartAX MA5800 versions V100R017C00, V100R017C10, V100R018C00, V100R018C10, V100R019C10; SmartAX EA5800 versions V100R018C00, V100R018C10, V100R019C10. | |||||
| CVE-2018-21156 | 1 Netgear | 66 D6220, D6220 Firmware, D6400 and 63 more | 2023-12-10 | 6.5 MEDIUM | 7.2 HIGH |
| Certain NETGEAR devices are affected by a buffer overflow by an authenticated user. This affects D6220 before 1.0.0.38, D6400 before 1.0.0.74, D7000v2 before 1.0.0.74, D8500 before 1.0.3.39, DGN2200v4 before 1.0.0.102, DGN2200Bv4 before 1.0.0.102, EX3700 before 1.0.0.70, EX3800 before 1.0.0.70, EX6000 before 1.0.0.30, EX6100 before 1.0.2.22, EX6120 before 1.0.0.40, EX6130 before 1.0.0.22, EX6150 before 1.0.0.38, EX6200 before 1.0.3.86, EX7000 before 1.0.0.64, R6250 before 1.0.4.20, R6300v2 before 1.0.4.22, R6400 before 1.0.1.32, R6400v2 before 1.0.2.52, R6700 before 1.0.1.44, R6900 before 1.0.1.44, R6900P before 1.3.0.18, R7000 before 1.0.9.28, R7000P before 1.3.0.18, R7300DST before 1.0.0.62, R7900 before 1.0.2.10, R7900P before 1.3.0.10, R8000 before 1.0.4.12, R8000P before 1.3.0.10, R8300 before 1.0.2.116, R8500 before 1.0.2.116, WN2500RPv2 before 1.0.1.52, WNDR3400v3 before 1.0.1.18, and WNR3500Lv2 before 1.2.0.46. | |||||
| CVE-2020-8718 | 1 Intel | 153 Compute Module Hns2600bp Firmware, Compute Module Hns2600bpb, Compute Module Hns2600bpb24 and 150 more | 2023-12-10 | 4.6 MEDIUM | 8.8 HIGH |
| Buffer overflow in a subsystem for some Intel(R) Server Boards, Server Systems and Compute Modules before version 1.59 may allow an authenticated user to potentially enable escalation of privilege via local access. | |||||
| CVE-2017-18779 | 1 Netgear | 36 D6200, D6200 Firmware, D7000 and 33 more | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| Certain NETGEAR devices are affected by a buffer overflow. This affects D6200 before 1.1.00.24, D7000 before 1.0.1.52, JNR1010v2 before 1.1.0.44, JR6150 before 1.0.1.12, JWNR2010v5 before 1.1.0.44, PR2000 before 1.0.0.20, R6020 before 1.0.0.26, R6050 before 1.0.1.12, R6080 before 1.0.0.26, R6120 before 1.0.0.36, R6220 before 1.1.0.60, R6700v2 before 1.2.0.12, R6800 before 1.2.0.12, R6900v2 before 1.2.0.12, WNDR3700v5 before 1.1.0.50, WNR1000v4 before 1.1.0.44, WNR2020 before 1.1.0.44, and WNR2050 before 1.1.0.44. | |||||
| CVE-2017-18660 | 1 Google | 1 Android | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on Samsung mobile devices with M(6.0) and N(7.x) software. There is a buffer overflow in tlc_server. The Samsung ID is SVE-2017-8888 (July 2017). | |||||
| CVE-2019-13172 | 1 Xerox | 2 Phaser 3320, Phaser 3320 Firmware | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| Some Xerox printers (such as the Phaser 3320 V53.006.16.000) were affected by a buffer overflow vulnerability in the Authentication Cookie of the web application that would allow an attacker to execute arbitrary code on the device. | |||||