Total
433 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-0290 | 1 Juniper | 26 Ex9200, Ex9204, Ex9208 and 23 more | 2023-12-10 | 3.3 LOW | 6.5 MEDIUM |
| Improper Handling of Exceptional Conditions in Ethernet interface frame processing of Juniper Networks Junos OS allows an attacker to send specially crafted frames over the local Ethernet segment, causing the interface to go into a down state, resulting in a Denial of Service (DoS) condition. The interface does not recover on its own and the FPC must be reset manually. Continued receipt and processing of these frames will create a sustained Denial of Service (DoS) condition. This issue is platform-specific and affects the following platforms and line cards: * MPC7E/8E/9E and MPC10E on MX240, MX480, MX960, MX2008, MX2010, and MX2020 * MX204, MX10003, MX10008, MX10016 * EX9200, EX9251 * SRX4600 No other products or platforms are affected by this vulnerability. An indication of this issue occurring can be seen in the system log messages, as shown below: user@host> show log messages | match "Failed to complete DFE tuning" fpc4 smic_phy_dfe_tuning_state: et-4/1/6 - Failed to complete DFE tuning (count 3) and interface will be in a permanently down state: user@host> show interfaces et-4/1/6 terse Interface Admin Link Proto Local Remote et-4/1/6 up down et-4/1/6.0 up down aenet --> ae101.0 This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S7 on MX Series; 17.1R1 and later versions prior to 17.2R3-S3 on MX Series; 17.3 versions prior to 17.3R3-S8 on MX Series; 17.4 versions prior to 17.4R2-S11, 17.4R3-S1 on MX Series, SRX4600; 18.1 versions prior to 18.1R3-S10 on MX Series, EX9200 Series, SRX4600; 18.2 versions prior to 18.2R3-S3 on MX Series, EX9200 Series, SRX4600; 18.3 versions prior to 18.3R3-S1 on MX Series, EX9200 Series, SRX4600; 18.4 versions prior to 18.4R2-S3, 18.4R3 on MX Series, EX9200 Series, SRX4600; 19.1 versions prior to 19.1R2-S1, 19.1R3 on MX Series, EX9200 Series, SRX4600; 19.2 versions prior to 19.2R1-S3, 19.2R2 on MX Series, EX9200 Series, SRX4600; 19.3 versions prior to 19.3R2 on MX Series, EX9200 Series, SRX4600. This issue does not affect Juniper Networks Junos OS versions prior to 16.1R1. | |||||
| CVE-2021-0007 | 1 Intel | 2 Ethernet Controller E810, Ethernet Controller E810 Firmware | 2023-12-10 | 2.1 LOW | 4.4 MEDIUM |
| Uncaught exception in firmware for Intel(R) Ethernet Adapters 800 Series Controllers and associated adapters before version 1.5.1.0 may allow a privileged attacker to potentially enable denial of service via local access. | |||||
| CVE-2021-31701 | 1 Mintty Project | 1 Mintty | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Mintty before 3.4.7 mishandles Bracketed Paste Mode. | |||||
| CVE-2021-30046 | 1 Vigra Computer Vision Library Project | 1 Vigra Computer Vision Library | 2023-12-10 | 4.3 MEDIUM | 6.5 MEDIUM |
| VIGRA Computer Vision Library Version-1-11-1 contains a segmentation fault vulnerability in the impex.hxx read_image_band() function, in which a crafted file can cause a denial of service. | |||||
| CVE-2021-39187 | 1 Parseplatform | 1 Parse-server | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| Parse Server is an open source backend that can be deployed to any infrastructure that can run Node.js. Prior to version 4.10.3, Parse Server crashes when if a query request contains an invalid value for the `explain` option. This is due to a bug in the MongoDB Node.js driver which throws an exception that Parse Server cannot catch. There is a patch for this issue in version 4.10.3. No workarounds aside from upgrading are known to exist. | |||||
| CVE-2021-25365 | 1 Google | 1 Android | 2023-12-10 | 7.2 HIGH | 7.8 HIGH |
| An improper exception control in softsimd prior to SMR APR-2021 Release 1 allows unprivileged applications to access the API in softsimd. | |||||
| CVE-2021-25380 | 1 Samsung | 1 Bixby | 2023-12-10 | 7.5 HIGH | 7.3 HIGH |
| Improper handling of exceptional conditions in Bixby prior to version 3.0.53.02 allows attacker to execute the actions registered by the user. | |||||
| CVE-2021-0259 | 1 Juniper | 9 Junos, Junos Os Evolved, Qfx5100 and 6 more | 2023-12-10 | 3.3 LOW | 7.4 HIGH |
| Due to a vulnerability in DDoS protection in Juniper Networks Junos OS and Junos OS Evolved on QFX5K Series switches in a VXLAN configuration, instability might be experienced in the underlay network as a consequence of exceeding the default ddos-protection aggregate threshold. If an attacker on a client device on the overlay network sends a high volume of specific, legitimate traffic in the overlay network, due to an improperly detected DDoS violation, the leaf might not process certain L2 traffic, sent by spines in the underlay network. Continued receipt and processing of the high volume traffic will sustain the Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on QFX5K Series: 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R2-S8, 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved on QFX5220: All versions prior to 20.3R2-EVO. | |||||
| CVE-2021-28165 | 4 Eclipse, Jenkins, Netapp and 1 more | 21 Jetty, Jenkins, Cloud Manager and 18 more | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| In Eclipse Jetty 7.2.2 to 9.4.38, 10.0.0.alpha0 to 10.0.1, and 11.0.0.alpha0 to 11.0.1, CPU usage can reach 100% upon receiving a large invalid TLS frame. | |||||
| CVE-2021-0003 | 1 Intel | 2 Ethernet Controller E810, Ethernet Controller E810 Firmware | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| Improper conditions check in some Intel(R) Ethernet Controllers 800 series Linux drivers before version 1.4.11 may allow an authenticated user to potentially enable information disclosure via local access. | |||||
| CVE-2021-34716 | 1 Cisco | 2 Expressway, Telepresence Video Communication Server | 2023-12-10 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as the root user. This vulnerability is due to incorrect handling of certain crafted software images that are uploaded to the affected device. An attacker could exploit this vulnerability by authenticating to the system as an administrative user and then uploading specific crafted software images to the affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user. | |||||
| CVE-2021-39242 | 3 Debian, Fedoraproject, Haproxy | 3 Debian Linux, Fedora, Haproxy | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered in HAProxy 2.2 before 2.2.16, 2.3 before 2.3.13, and 2.4 before 2.4.3. It can lead to a situation with an attacker-controlled HTTP Host header, because a mismatch between Host and authority is mishandled. | |||||
| CVE-2021-25662 | 1 Siemens | 19 Simatic Hmi Comfort Outdoor Panels 15\", Simatic Hmi Comfort Outdoor Panels 15\" Firmware, Simatic Hmi Comfort Outdoor Panels 7\" and 16 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC client fails to handle an exception properly if the program execution process is modified after sending a packet from the server, which could result in a Denial-of-Service condition. | |||||
| CVE-2021-36128 | 1 Mediawiki | 1 Mediawiki | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in the CentralAuth extension in MediaWiki through 1.36. Autoblocks for CentralAuth-issued suppression blocks are not properly implemented. | |||||
| CVE-2021-0240 | 1 Juniper | 1 Junos | 2023-12-10 | 2.9 LOW | 6.5 MEDIUM |
| On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, the Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash if a malformed DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2. | |||||
| CVE-2021-1578 | 1 Cisco | 2 Application Policy Infrastructure Controller, Cloud Application Policy Infrastructure Controller | 2023-12-10 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in an API endpoint of Cisco Application Policy Infrastructure Controller (APIC) and Cisco Cloud Application Policy Infrastructure Controller (Cloud APIC) could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected device. This vulnerability is due to an improper policy default setting. An attacker could exploit this vulnerability by using a non-privileged credential for Cisco ACI Multi-Site Orchestrator (MSO) to send a specific API request to a managed Cisco APIC or Cloud APIC device. A successful exploit could allow the attacker to obtain Administrator credentials on the affected device. | |||||
| CVE-2021-30639 | 3 Apache, Mcafee, Oracle | 3 Tomcat, Epolicy Orchestrator, Big Data Spatial And Graph | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in Apache Tomcat allows an attacker to remotely trigger a denial of service. An error introduced as part of a change to improve error handling during non-blocking I/O meant that the error flag associated with the Request object was not reset between requests. This meant that once a non-blocking I/O error occurred, all future requests handled by that request object would fail. Users were able to trigger non-blocking I/O errors, e.g. by dropping a connection, thereby creating the possibility of triggering a DoS. Applications that do not use non-blocking I/O are not exposed to this vulnerability. This issue affects Apache Tomcat 10.0.3 to 10.0.4; 9.0.44; 8.5.64. | |||||
| CVE-2021-29618 | 1 Google | 1 Tensorflow | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| TensorFlow is an end-to-end open source platform for machine learning. Passing a complex argument to `tf.transpose` at the same time as passing `conjugate=True` argument results in a crash. The fix will be included in TensorFlow 2.5.0. We will also cherrypick this commit on TensorFlow 2.4.2, TensorFlow 2.3.3, TensorFlow 2.2.3 and TensorFlow 2.1.4, as these are also affected and still in supported range. | |||||
| CVE-2021-33477 | 6 Debian, Eterm Project, Fedoraproject and 3 more | 6 Debian Linux, Eterm, Fedora and 3 more | 2023-12-10 | 6.5 MEDIUM | 8.8 HIGH |
| rxvt-unicode 9.22, rxvt 2.7.10, mrxvt 0.5.4, and Eterm 0.9.7 allow (potentially remote) code execution because of improper handling of certain escape sequences (ESC G Q). A response is terminated by a newline. | |||||
| CVE-2021-1102 | 1 Nvidia | 1 Virtual Gpu | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| NVIDIA vGPU software contains a vulnerability in the Virtual GPU Manager (vGPU plugin), where it can lead to floating point exceptions, which may lead to denial of service. This affects vGPU version 12.x (prior to 12.3), version 11.x (prior to 11.5) and version 8.x (prior 8.8). | |||||