Total
434 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-19991 | 1 Verynginx Project | 1 Verynginx | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| VeryNginx 0.3.3 allows remote attackers to bypass the Web Application Firewall feature because there is no error handler (for get_uri_args or get_post_args) to block the API misuse described in CVE-2018-9230. | |||||
| CVE-2019-6256 | 2 Debian, Live555 | 2 Debian Linux, Live555 Media Server | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| A Denial of Service issue was discovered in the LIVE555 Streaming Media libraries as used in Live555 Media Server 0.93. It can cause an RTSPServer crash in handleHTTPCmd_TunnelingPOST, when RTSP-over-HTTP tunneling is supported, via x-sessioncookie HTTP headers in a GET request and a POST request within the same TCP session. This occurs because of a call to an incorrect virtual function pointer in the readSocket function in GroupsockHelper.cpp. | |||||
| CVE-2017-7518 | 4 Canonical, Debian, Linux and 1 more | 9 Ubuntu Linux, Debian Linux, Linux Kernel and 6 more | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| A flaw was found in the Linux kernel before version 4.12 in the way the KVM module processed the trap flag(TF) bit in EFLAGS during emulation of the syscall instruction, which leads to a debug exception(#DB) being raised in the guest stack. A user/process inside a guest could use this flaw to potentially escalate their privileges inside the guest. Linux guests are not affected by this. | |||||
| CVE-2018-1677 | 1 Ibm | 1 Datapower Gateway | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| IBM DataPower Gateways 7.1, 7.2, 7.5, 7.5.1, 7.5.2, 7.6, and 7.7 and IBM MQ Appliance are vulnerable to a denial of service, caused by the improper handling of full file system. A local attacker could exploit this vulnerability to cause a denial of service. IBM X-Force ID: 145171. | |||||
| CVE-2017-2877 | 1 Foscam | 2 C1, C1 Firmware | 2023-12-10 | 7.5 HIGH | 9.8 CRITICAL |
| A missing error check exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10001 could allow an attacker to reset the user accounts to factory defaults, without authentication. | |||||
| CVE-2017-17172 | 1 Huawei | 2 Lyo-l21, Lyo-l21 Firmware | 2023-12-10 | 4.4 MEDIUM | 7.3 HIGH |
| Huawei smart phones LYO-L21 with software LYO-L21C479B107, LYO-L21C479B107 have a privilege escalation vulnerability. An authenticated, local attacker can crafts malformed packets after tricking a user to install a malicious application and exploit this vulnerability when in the exception handling process. Successful exploitation may cause the attacker to obtain a higher privilege of the smart phones. | |||||
| CVE-2018-0286 | 1 Cisco | 1 Ios Xr | 2023-12-10 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the netconf interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on affected system. The vulnerability is due to improper handling of malformed requests processed by the netconf process. An attacker could exploit this vulnerability by sending malicious requests to the affected software. An exploit could allow the attacker to cause the targeted process to restart, resulting in a DoS condition on the affected system. Cisco Bug IDs: CSCvg95792. | |||||
| CVE-2018-0934 | 1 Microsoft | 4 Chakracore, Edge, Windows 10 and 1 more | 2023-12-10 | 7.6 HIGH | 7.5 HIGH |
| ChakraCore and Microsoft Windows 10 Gold, 1511, 1607, 1703, 1709, and Windows Server 2016 allows remote code execution, due to how the Chakra scripting engine handles objects in memory, aka "Chakra Scripting Engine Memory Corruption Vulnerability". This CVE ID is unique from CVE-2018-0872, CVE-2018-0873, CVE-2018-0874, CVE-2018-0930, CVE-2018-0931, CVE-2018-0933, CVE-2018-0936, and CVE-2018-0937. | |||||
| CVE-2018-0272 | 1 Cisco | 1 Firepower | 2023-12-10 | 4.3 MEDIUM | 5.9 MEDIUM |
| A vulnerability in the Secure Sockets Layer (SSL) Engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper error handling while processing SSL traffic. An attacker could exploit this vulnerability by sending a large volume of crafted SSL traffic to the vulnerable device. A successful exploit could allow the attacker to degrade the device performance by triggering a persistent high CPU utilization condition. Cisco Bug IDs: CSCvh89340. | |||||
| CVE-2018-0155 | 2 Cisco, Rockwellautomation | 13 Catalyst 4500-x Series Switches \(k10\), Catalyst 4500 Supervisor Engine 6-e \(k5\), Catalyst 4500 Supervisor Engine 6l-e \(k10\) and 10 more | 2023-12-10 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729. | |||||
| CVE-2018-1269 | 1 Cloudfoundry | 1 Loggregator | 2023-12-10 | 4.0 MEDIUM | 6.5 MEDIUM |
| Cloud Foundry Loggregator, versions 89.x prior to 89.5 or 96.x prior to 96.1 or 99.x prior to 99.1 or 101.x prior to 101.9 or 102.x prior to 102.2, does not handle errors thrown while constructing certain http requests. A remote authenticated user may construct malicious requests to cause the traffic controller to leave dangling TCP connections, which could cause denial of service. | |||||
| CVE-2017-14178 | 1 Snapcraft | 1 Snapd | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| In snapd 2.27 through 2.29.2 the 'snap logs' command could be made to call journalctl without match arguments and therefore allow unprivileged, unauthenticated users to bypass systemd-journald's access restrictions. | |||||
| CVE-2018-0316 | 1 Cisco | 13 Ip Phone 6841, Ip Phone 6851, Ip Phone 7811 and 10 more | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718. | |||||
| CVE-2017-9657 | 1 Philips | 2 Intellivue Mx40, Intellivue Mx40 Firmware | 2023-12-10 | 3.3 LOW | 6.5 MEDIUM |
| Under specific 802.11 network conditions, a partial re-association of the Philips IntelliVue MX40 Version B.06.18 WLAN monitor to the central monitoring station is possible. In this state, the central monitoring station can indicate the MX40 is not connected or associated to the central monitor, and thus should be operating in local monitoring mode (local audio-on, screen-on), but the MX40 WLAN itself can instead still be operating in telemetry mode (local audio-off, screen-off). If a patient experiences an alarm event and clinical staff expects the MX40 to provide local alarming when it is not available from the local device, a delay of treatment can occur. CVSS v3 base score: 6.5, CVSS vector string: AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H. Philips has released software update, Version B.06.18, to fix the improper cleanup on thrown exception vulnerability, and implement mitigations to reduce the risk associated with the improper handling of exceptional conditions vulnerability. The software update implements messaging and alarming on the MX40 and at the central monitoring station, when the MX40 disconnects from the access point. | |||||
| CVE-2018-8039 | 2 Apache, Redhat | 2 Cxf, Jboss Enterprise Application Platform | 2023-12-10 | 6.8 MEDIUM | 8.1 HIGH |
| It is possible to configure Apache CXF to use the com.sun.net.ssl implementation via 'System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");'. When this system property is set, CXF uses some reflection to try to make the HostnameVerifier work with the old com.sun.net.ssl.HostnameVerifier interface. However, the default HostnameVerifier implementation in CXF does not implement the method in this interface, and an exception is thrown. However, in Apache CXF prior to 3.2.5 and 3.1.16 the exception is caught in the reflection code and not properly propagated. What this means is that if you are using the com.sun.net.ssl stack with CXF, an error with TLS hostname verification will not be thrown, leaving a CXF client subject to man-in-the-middle attacks. | |||||
| CVE-2017-9658 | 1 Philips | 2 Intellivue Mx40, Intellivue Mx40 Firmware | 2023-12-10 | 6.1 MEDIUM | 6.5 MEDIUM |
| Certain 802.11 network management messages have been determined to invoke wireless access point blacklisting security defenses when not required, which can necessitate intervention by hospital staff to reset the device and reestablish a network connection to the Wi-Fi access point. During this state, the Philips IntelliVue MX40 Version B.06.18 can either connect to an alternative access point within signal range for association to a central monitoring station, or it can remain in local monitoring mode until the device is reset by hospital staff. CVSS v3 base score: 6.5, CVSS vector string: AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H. Philips has released software update, Version B.06.18, to fix the improper cleanup on thrown exception vulnerability, and implement mitigations to reduce the risk associated with the improper handling of exceptional conditions vulnerability. The software update implements messaging and alarming on the MX40 and at the central monitoring station, when the MX40 disconnects from the access point. | |||||
| CVE-2017-5664 | 1 Apache | 1 Tomcat | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| The error page mechanism of the Java Servlet Specification requires that, when an error occurs and an error page is configured for the error that occurred, the original request and response are forwarded to the error page. This means that the request is presented to the error page with the original HTTP method. If the error page is a static file, expected behaviour is to serve content of the file as if processing a GET request, regardless of the actual HTTP method. The Default Servlet in Apache Tomcat 9.0.0.M1 to 9.0.0.M20, 8.5.0 to 8.5.14, 8.0.0.RC1 to 8.0.43 and 7.0.0 to 7.0.77 did not do this. Depending on the original request this could lead to unexpected and undesirable results for static error pages including, if the DefaultServlet is configured to permit writes, the replacement or removal of the custom error page. Notes for other user provided error pages: (1) Unless explicitly coded otherwise, JSPs ignore the HTTP method. JSPs used as error pages must must ensure that they handle any error dispatch as a GET request, regardless of the actual method. (2) By default, the response generated by a Servlet does depend on the HTTP method. Custom Servlets used as error pages must ensure that they handle any error dispatch as a GET request, regardless of the actual method. | |||||
| CVE-2017-0193 | 1 Microsoft | 6 Windows 10, Windows 7, Windows 8.1 and 3 more | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| Windows Hyper-V in Microsoft Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8.1, Windows Server 2012 Gold and R2, Windows RT 8.1, Windows 10 Gold, 1511, 1607, 1703, and Windows Server 2016 allows an attacker to gain elevated privileges on a target guest operating system when Windows Hyper-V instruction emulation fails to properly enforce privilege levels, aka "Hypervisor Code Integrity Elevation of Privilege Vulnerability". | |||||
| CVE-2017-11140 | 1 Graphicsmagick | 1 Graphicsmagick | 2023-12-10 | 7.1 HIGH | 5.5 MEDIUM |
| The ReadJPEGImage function in coders/jpeg.c in GraphicsMagick 1.3.26 creates a pixel cache before a successful read of a scanline, which allows remote attackers to cause a denial of service (resource consumption) via crafted JPEG files. | |||||
| CVE-2017-7496 | 1 Fedoraproject | 1 Arm Installer | 2023-12-10 | 4.4 MEDIUM | 7.0 HIGH |
| fedora-arm-installer up to and including 1.99.16 is vulnerable to local privilege escalation due to lack of checking the error condition of mount operation failure on unsafely created temporary directories. | |||||