Filtered by vendor Siemens
Subscribe
Total
1751 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-0591 | 2 Intel, Siemens | 202 Bios, Core I5-7640x, Core I7-3820 and 199 more | 2023-12-10 | 4.6 MEDIUM | 6.7 MEDIUM |
| Improper buffer restrictions in BIOS firmware for some Intel(R) Processors may allow a privileged user to potentially enable escalation of privilege via local access. | |||||
| CVE-2020-15797 | 1 Siemens | 2 Dca Vantage Analyzer, Dca Vantage Analyzer Firmware | 2023-12-10 | 7.2 HIGH | 6.8 MEDIUM |
| A vulnerability has been identified in DCA Vantage Analyzer (All versions < V4.5 are affected by CVE-2020-7590. In addition, serial numbers < 40000 running software V4.4.0 are also affected by CVE-2020-15797). Improper Access Control could allow an unauthenticated attacker to escape from the restricted environment (“kiosk mode”) and access the underlying operating system. Successful exploitation requires direct physical access to the system. | |||||
| CVE-2020-25240 | 1 Siemens | 1 Sinema Remote Connect Server | 2023-12-10 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V3.0). Unpriviledged users can access services when guessing the url. An attacker could impact availability, integrity and gain information from logs and templates of the service. | |||||
| CVE-2020-26998 | 1 Siemens | 2 Jt2go, Teamcenter Visualization | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability has been identified in JT2Go (All versions < V13.1.0.2), Teamcenter Visualization (All versions < V13.1.0.2). Affected applications lack proper validation of user-supplied data when parsing of PAR files. This could result in a memory access past the end of an allocated buffer. An attacker could leverage this vulnerability to leak information. (ZDI-CAN-12040) | |||||
| CVE-2021-25175 | 2 Opendesign, Siemens | 4 Drawings Software Development Kit, Comos, Jt2go and 1 more | 2023-12-10 | 6.8 MEDIUM | 7.8 HIGH |
| An issue was discovered in Open Design Alliance Drawings SDK before 2021.11. A Type Conversion issue exists when rendering malformed .DXF and .DWG files. This can allow attackers to cause a crash, potentially enabling a denial of service attack (Crash, Exit, or Restart). | |||||
| CVE-2019-19289 | 1 Siemens | 1 Xhq | 2023-12-10 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability has been identified in XHQ (All Versions < 6.1). The web interface could allow a Cross-Site Request Forgery (CSRF) attack if an unsuspecting user is tricked into accessing a malicious link. | |||||
| CVE-2020-8287 | 5 Debian, Fedoraproject, Nodejs and 2 more | 5 Debian Linux, Fedora, Node.js and 2 more | 2023-12-10 | 6.4 MEDIUM | 6.5 MEDIUM |
| Node.js versions before 10.23.1, 12.20.1, 14.15.4, 15.5.1 allow two copies of a header field in an HTTP request (for example, two Transfer-Encoding header fields). In this case, Node.js identifies the first header field and ignores the second. This can lead to HTTP Request Smuggling. | |||||
| CVE-2020-25228 | 1 Siemens | 2 Logo\! 8 Bm, Logo\! 8 Bm Firmware | 2023-12-10 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). A service available on port 10005/tcp of the affected devices could allow complete access to all services without authorization. An attacker could gain full control over an affected device, if he has access to this service. The system manual recommends to protect access to this port. | |||||
| CVE-2020-8625 | 5 Debian, Fedoraproject, Isc and 2 more | 9 Debian Linux, Fedora, Bind and 6 more | 2023-12-10 | 6.8 MEDIUM | 8.1 HIGH |
| BIND servers are vulnerable if they are running an affected version and are configured to use GSS-TSIG features. In a configuration which uses BIND's default settings the vulnerable code path is not exposed, but a server can be rendered vulnerable by explicitly setting valid values for the tkey-gssapi-keytab or tkey-gssapi-credentialconfiguration options. Although the default configuration is not vulnerable, GSS-TSIG is frequently used in networks where BIND is integrated with Samba, as well as in mixed-server environments that combine BIND servers with Active Directory domain controllers. The most likely outcome of a successful exploitation of the vulnerability is a crash of the named process. However, remote code execution, while unproven, is theoretically possible. Affects: BIND 9.5.0 -> 9.11.27, 9.12.0 -> 9.16.11, and versions BIND 9.11.3-S1 -> 9.11.27-S1 and 9.16.8-S1 -> 9.16.11-S1 of BIND Supported Preview Edition. Also release versions 9.17.0 -> 9.17.1 of the BIND 9.17 development branch | |||||
| CVE-2021-22651 | 2 Luxion, Siemens | 8 Keyshot, Keyshot Network Rendering, Keyshot Viewer and 5 more | 2023-12-10 | 6.8 MEDIUM | 7.8 HIGH |
| When loading a specially crafted file, Luxion KeyShot versions prior to 10.1, Luxion KeyShot Viewer versions prior to 10.1, Luxion KeyShot Network Rendering versions prior to 10.1, and Luxion KeyVR versions prior to 10.1 are, while processing the extraction of temporary files, suffering from a directory traversal vulnerability, which allows an attacker to store arbitrary scripts into automatic startup folders. | |||||
| CVE-2020-0590 | 3 Intel, Netapp, Siemens | 271 Xeon Bronze 3104, Xeon Bronze 3104 Firmware, Xeon Bronze 3106 and 268 more | 2023-12-10 | 4.6 MEDIUM | 7.8 HIGH |
| Improper input validation in BIOS firmware for some Intel(R) Processors may allow an authenticated user to potentially enable escalation of privilege via local access. | |||||
| CVE-2021-23839 | 3 Openssl, Oracle, Siemens | 8 Openssl, Business Intelligence, Enterprise Manager For Storage Management and 5 more | 2023-12-10 | 4.3 MEDIUM | 3.7 LOW |
| OpenSSL 1.0.2 supports SSLv2. If a client attempts to negotiate SSLv2 with a server that is configured to support both SSLv2 and more recent SSL and TLS versions then a check is made for a version rollback attack when unpadding an RSA signature. Clients that support SSL or TLS versions greater than SSLv2 are supposed to use a special form of padding. A server that supports greater than SSLv2 is supposed to reject connection attempts from a client where this special form of padding is present, because this indicates that a version rollback has occurred (i.e. both client and server support greater than SSLv2, and yet this is the version that is being requested). The implementation of this padding check inverted the logic so that the connection attempt is accepted if the padding is present, and rejected if it is absent. This means that such as server will accept a connection if a version rollback attack has occurred. Further the server will erroneously reject a connection if a normal SSLv2 connection attempt is made. Only OpenSSL 1.0.2 servers from version 1.0.2s to 1.0.2x are affected by this issue. In order to be vulnerable a 1.0.2 server must: 1) have configured SSLv2 support at compile time (this is off by default), 2) have configured SSLv2 support at runtime (this is off by default), 3) have configured SSLv2 ciphersuites (these are not in the default ciphersuite list) OpenSSL 1.1.1 does not have SSLv2 support and therefore is not vulnerable to this issue. The underlying error is in the implementation of the RSA_padding_check_SSLv23() function. This also affects the RSA_SSLV23_PADDING padding mode used by various other functions. Although 1.1.1 does not support SSLv2 the RSA_padding_check_SSLv23() function still exists, as does the RSA_SSLV23_PADDING padding mode. Applications that directly call that function or use that padding mode will encounter this issue. However since there is no support for the SSLv2 protocol in 1.1.1 this is considered a bug and not a security issue in that version. OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.0.2y (Affected 1.0.2s-1.0.2x). | |||||
| CVE-2018-18508 | 2 Mozilla, Siemens | 17 Network Security Services, Ruggedcom Rox Mx5000, Ruggedcom Rox Mx5000 Firmware and 14 more | 2023-12-10 | 4.3 MEDIUM | 6.5 MEDIUM |
| In Network Security Services (NSS) before 3.36.7 and before 3.41.1, a malformed signature can cause a crash due to a null dereference, resulting in a Denial of Service. | |||||
| CVE-2020-28390 | 1 Siemens | 1 Opcenter Execution Core | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability has been identified in Opcenter Execution Core (V8.2), Opcenter Execution Core (V8.3). The application contains an information leakage vulnerability in the handling of web client sessions. A local attacker who has access to the Web Client Session Storage could disclose the passwords of currently logged-in users. | |||||
| CVE-2020-25235 | 1 Siemens | 2 Logo\! 8 Bm, Logo\! 8 Bm Firmware | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). The password used for authentication for the LOGO! Website and the LOGO! Access Tool is sent in a recoverable format. An attacker with access to the network traffic could derive valid logins. | |||||
| CVE-2021-23337 | 4 Lodash, Netapp, Oracle and 1 more | 23 Lodash, Active Iq Unified Manager, Cloud Manager and 20 more | 2023-12-10 | 6.5 MEDIUM | 7.2 HIGH |
| Lodash versions prior to 4.17.21 are vulnerable to Command Injection via the template function. | |||||
| CVE-2021-22883 | 5 Fedoraproject, Netapp, Nodejs and 2 more | 9 Fedora, E-series Performance Analyzer, Node.js and 6 more | 2023-12-10 | 7.8 HIGH | 7.5 HIGH |
| Node.js before 10.24.0, 12.21.0, 14.16.0, and 15.10.0 is vulnerable to a denial of service attack when too many connection attempts with an 'unknownProtocol' are established. This leads to a leak of file descriptors. If a file descriptor limit is configured on the system, then the server is unable to accept new connections and prevent the process also from opening, e.g. a file. If no file descriptor limit is configured, then this lead to an excessive memory usage and cause the system to run out of memory. | |||||
| CVE-2020-15796 | 1 Siemens | 4 Simatic Et 200sp Open Controller, Simatic Et 200sp Open Controller Firmware, Simatic S7-1500 Software Controller and 1 more | 2023-12-10 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC ET 200SP Open Controller (incl. SIPLUS variants) (V20.8), SIMATIC S7-1500 Software Controller (V20.8). The web server of the affected products contains a vulnerability that could allow a remote attacker to trigger a denial-of-service condition by sending a specially crafted HTTP request. | |||||
| CVE-2020-26987 | 1 Siemens | 2 Jt2go, Teamcenter Visualization | 2023-12-10 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability has been identified in JT2Go (All versions < V13.1.0), Teamcenter Visualization (All versions < V13.1.0). Affected applications lack proper validation of user-supplied data when parsing of TGA files. This could lead to a heap-based buffer overflow. An attacker could leverage this vulnerability to execute code in the context of the current process. (ZDI-CAN-12016, ZDI-CAN-12017) | |||||
| CVE-2020-27008 | 1 Siemens | 2 Jt2go, Teamcenter Visualization | 2023-12-10 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability has been identified in JT2Go (All versions < V13.1.0.1), Teamcenter Visualization (All versions < V13.1.0.1). Affected applications lack proper validation of user-supplied data when parsing of PLT files. This could result in a memory access past the end of an allocated buffer. An attacker could leverage this vulnerability to access data in the context of the current process. (ZDI-CAN-12209) | |||||