Vulnerabilities (CVE)

Filtered by vendor Netapp Subscribe
Filtered by product Clustered Data Ontap
Total 186 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2023-28322 4 Apple, Fedoraproject, Haxx and 1 more 13 Macos, Fedora, Curl and 10 more 2023-12-22 N/A 3.7 LOW
An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request which used that callback. This flaw may surprise the application and cause it to misbehave and either send off the wrong data or use memory after free or similar in the second transfer. The problem exists in the logic for a reused handle when it is (expected to be) changed from a PUT to a POST.
CVE-2023-3107 2 Freebsd, Netapp 2 Freebsd, Clustered Data Ontap 2023-12-10 N/A 7.5 HIGH
A set of carefully crafted ipv6 packets can trigger an integer overflow in the calculation of a fragment reassembled packet's payload length field. This allows an attacker to trigger a kernel panic, resulting in a denial of service.
CVE-2023-36054 3 Debian, Mit, Netapp 7 Debian Linux, Kerberos 5, Active Iq Unified Manager and 4 more 2023-12-10 N/A 6.5 MEDIUM
lib/kadm5/kadm_rpc_xdr.c in MIT Kerberos 5 (aka krb5) before 1.20.2 and 1.21.x before 1.21.1 frees an uninitialized pointer. A remote authenticated user can trigger a kadmind crash. This occurs because _xdr_kadm5_principal_ent_rec does not validate the relationship between n_key_data and the key_data array count.
CVE-2023-27314 1 Netapp 1 Clustered Data Ontap 2023-12-10 N/A 7.5 HIGH
ONTAP 9 versions prior to 9.8P19, 9.9.1P16, 9.10.1P12, 9.11.1P8, 9.12.1P2 and 9.13.1 are susceptible to a vulnerability which could allow a remote unauthenticated attacker to cause a crash of the HTTP service.
CVE-2023-28321 5 Apple, Debian, Fedoraproject and 2 more 14 Macos, Debian Linux, Fedora and 11 more 2023-12-10 N/A 5.9 MEDIUM
An improper certificate validation vulnerability exists in curl <v8.1.0 in the way it supports matching of wildcard patterns when listed as "Subject Alternative Name" in TLS server certificates. curl can be built to use its own name matching function for TLS rather than one provided by a TLS library. This private wildcard matching function would match IDN (International Domain Name) hosts incorrectly and could as a result accept patterns that otherwise should mismatch. IDN hostnames are converted to puny code before used for certificate checks. Puny coded names always start with `xn--` and should not be allowed to pattern match, but the wildcard check in curl could still check for `x*`, which would match even though the IDN name most likely contained nothing even resembling an `x`.
CVE-2023-2953 4 Apple, Netapp, Openldap and 1 more 16 Macos, Active Iq Unified Manager, Clustered Data Ontap and 13 more 2023-12-10 N/A 7.5 HIGH
A vulnerability was found in openldap. This security flaw causes a null pointer dereference in ber_memalloc_x() function.
CVE-2023-28320 3 Apple, Haxx, Netapp 12 Macos, Curl, Clustered Data Ontap and 9 more 2023-12-10 N/A 5.9 MEDIUM
A denial of service vulnerability exists in curl <v8.1.0 in the way libcurl provides several different backends for resolving host names, selected at build time. If it is built to use the synchronous resolver, it allows name resolves to time-out slow operations using `alarm()` and `siglongjmp()`. When doing this, libcurl used a global buffer that was not mutex protected and a multi-threaded application might therefore crash or otherwise misbehave.
CVE-2023-28319 3 Apple, Haxx, Netapp 12 Macos, Curl, Clustered Data Ontap and 9 more 2023-12-10 N/A 7.5 HIGH
A use after free vulnerability exists in curl <v8.1.0 in the way libcurl offers a feature to verify an SSH server's public key using a SHA 256 hash. When this check fails, libcurl would free the memory for the fingerprint before it returns an error message containing the (now freed) hash. This flaw risks inserting sensitive heap-based data into the error message that might be shown to users or otherwise get leaked and revealed.
CVE-2022-40303 3 Apple, Netapp, Xmlsoft 22 Ipados, Iphone Os, Macos and 19 more 2023-12-10 N/A 7.5 HIGH
An issue was discovered in libxml2 before 2.10.3. When parsing a multi-gigabyte XML document with the XML_PARSE_HUGE parser option enabled, several integer counters can overflow. This results in an attempt to access an array at a negative 2GB offset, typically leading to a segmentation fault.
CVE-2022-40304 3 Apple, Netapp, Xmlsoft 22 Ipados, Iphone Os, Macos and 19 more 2023-12-10 N/A 7.8 HIGH
An issue was discovered in libxml2 before 2.10.3. Certain invalid XML entity definitions can corrupt a hash table key, potentially leading to subsequent logic errors. In one case, a double-free can be provoked.
CVE-2022-3602 4 Fedoraproject, Netapp, Nodejs and 1 more 4 Fedora, Clustered Data Ontap, Node.js and 1 more 2023-12-10 N/A 7.5 HIGH
A buffer overrun can be triggered in X.509 certificate verification, specifically in name constraint checking. Note that this occurs after certificate chain signature verification and requires either a CA to have signed the malicious certificate or for the application to continue certificate verification despite failure to construct a path to a trusted issuer. An attacker can craft a malicious email address to overflow four attacker-controlled bytes on the stack. This buffer overflow could result in a crash (causing a denial of service) or potentially remote code execution. Many platforms implement stack overflow protections which would mitigate against the risk of remote code execution. The risk may be further mitigated based on stack layout for any given platform/compiler. Pre-announcements of CVE-2022-3602 described this issue as CRITICAL. Further analysis based on some of the mitigating factors described above have led this to be downgraded to HIGH. Users are still encouraged to upgrade to a new version as soon as possible. In a TLS client, this can be triggered by connecting to a malicious server. In a TLS server, this can be triggered if the server requests client authentication and a malicious client connects. Fixed in OpenSSL 3.0.7 (Affected 3.0.0,3.0.1,3.0.2,3.0.3,3.0.4,3.0.5,3.0.6).
CVE-2022-23241 1 Netapp 1 Clustered Data Ontap 2023-12-10 N/A 8.1 HIGH
Clustered Data ONTAP versions 9.11.1 through 9.11.1P2 with SnapLock configured FlexGroups are susceptible to a vulnerability which could allow an authenticated remote attacker to arbitrarily modify or delete WORM data prior to the end of the retention period.
CVE-2022-1434 2 Netapp, Openssl 43 A250, A250 Firmware, A700s and 40 more 2023-12-10 4.3 MEDIUM 5.9 MEDIUM
The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).
CVE-2021-0127 2 Intel, Netapp 755 Celeron G1610, Celeron G1610t, Celeron G1620 and 752 more 2023-12-10 2.1 LOW 5.5 MEDIUM
Insufficient control flow management in some Intel(R) Processors may allow an authenticated user to potentially enable a denial of service via local access.
CVE-2022-1343 2 Netapp, Openssl 43 A250, A250 Firmware, A700s and 40 more 2023-12-10 4.3 MEDIUM 5.3 MEDIUM
The function `OCSP_basic_verify` verifies the signer certificate on an OCSP response. In the case where the (non-default) flag OCSP_NOCHECKS is used then the response will be positive (meaning a successful verification) even in the case where the response signing certificate fails to verify. It is anticipated that most users of `OCSP_basic_verify` will not use the OCSP_NOCHECKS flag. In this case the `OCSP_basic_verify` function will return a negative value (indicating a fatal error) in the case of a certificate verification failure. The normal expected return value in this case would be 0. This issue also impacts the command line OpenSSL "ocsp" application. When verifying an ocsp response with the "-no_cert_checks" option the command line application will report that the verification is successful even though it has in fact failed. In this case the incorrect successful response will also be accompanied by error messages showing the failure and contradicting the apparently successful result. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).
CVE-2022-31813 3 Apache, Fedoraproject, Netapp 3 Http Server, Fedora, Clustered Data Ontap 2023-12-10 7.5 HIGH 9.8 CRITICAL
Apache HTTP Server 2.4.53 and earlier may not send the X-Forwarded-* headers to the origin server based on client side Connection header hop-by-hop mechanism. This may be used to bypass IP based authentication on the origin server/application.
CVE-2022-29824 5 Debian, Fedoraproject, Netapp and 2 more 24 Debian Linux, Fedora, Active Iq Unified Manager and 21 more 2023-12-10 4.3 MEDIUM 6.5 MEDIUM
In libxml2 before 2.9.14, several buffer handling functions in buf.c (xmlBuf*) and tree.c (xmlBuffer*) don't check for integer overflows. This can result in out-of-bounds memory writes. Exploitation requires a victim to open a crafted, multi-gigabyte XML file. Other software using libxml2's buffer functions, for example libxslt through 1.1.35, is affected as well.
CVE-2022-1292 5 Debian, Fedoraproject, Netapp and 2 more 51 Debian Linux, Fedora, A250 and 48 more 2023-12-10 10.0 HIGH 9.8 CRITICAL
The c_rehash script does not properly sanitise shell metacharacters to prevent command injection. This script is distributed by some operating systems in a manner where it is automatically executed. On such operating systems, an attacker could execute arbitrary commands with the privileges of the script. Use of the c_rehash script is considered obsolete and should be replaced by the OpenSSL rehash command line tool. Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2). Fixed in OpenSSL 1.1.1o (Affected 1.1.1-1.1.1n). Fixed in OpenSSL 1.0.2ze (Affected 1.0.2-1.0.2zd).
CVE-2022-29404 3 Apache, Fedoraproject, Netapp 3 Http Server, Fedora, Clustered Data Ontap 2023-12-10 5.0 MEDIUM 7.5 HIGH
In Apache HTTP Server 2.4.53 and earlier, a malicious request to a lua script that calls r:parsebody(0) may cause a denial of service due to no default limit on possible input size.
CVE-2022-30522 3 Apache, Fedoraproject, Netapp 3 Http Server, Fedora, Clustered Data Ontap 2023-12-10 5.0 MEDIUM 7.5 HIGH
If Apache HTTP Server 2.4.53 is configured to do transformations with mod_sed in contexts where the input to mod_sed may be very large, mod_sed may make excessively large memory allocations and trigger an abort.